Modular Rail Modelling in New Zealand

Saturday, April 3, 2010

Convention 2010 part 2

A little more from the convention. I wasn't able to attend for the entire day today, with work commitments and so forth, but I managed to spend a few hours over there. I has a couple more good discussion about the scale, and was able to catch up with Greg (Weeduggie) about the developments he is making. Russell from Trackgang also showed me the method for installing the new bearings he is including with his kits, and these give a very obvious improvement in performance.

Here are a couple more pictures, first one of Russell and his Trackgang table, and second of the excellent Kai Iwi Tunnel layout adjacent to our setup:

Photobucket

Photobucket

The convention has also been the prompt for a little thought on my part, so the following is an account of some of my recent cogitations.

First off, my big disappointment at the convention is not being able to run the layout because of its partially completed state. Of course this can't be helped given that I've only been building the thing for five months, but it has fueled my enthusiasm for finishing enough modules to form a loop to make running practicable.

At the least, this means five further sections, but ideally another seven, with four sections for the end pieces, and three for the other side of the loop. I've already got a number of ideas for what to put on the other sections scenic-wise, but I think I have decided to concentrate in the next six months on getting the framework built and track laid so to have a functioning layout. Then I can move on to the scenic work. I'll spend a bit of time soon calculating the amount of timber I'll need for the other sections (obviously it will be something like twice the amount that went into the current three sections). Hopefully I can get the materials and make a start on building these in the next couple of months.

Second, I've had a few thoughts about the scope of the scale for modelling. Looking around at the quality of the other modular layouts on display at the convention, I think our stuff compares very nicely, and it strikes me that our scale has a number of advantages, most obviously in terms of what can be put into a given space. Even though in comparison our scale looks quite dinky, I don't think you need to compromise in term of the level of detail you can put in NZ120.

There is occasionally talk about NZ120 being a "two foot scale" in that it's sufficient that it looks good from this distance and gives a good general impression. I'm not sure I agree with this, and in fact I think it sells the scale short in that there is plenty of potential to build detailed models that bear very close scrutiny. One of the most impressive things I've seen at the scale are Weeduggie's brass etches for various small locos. These look excellent, and I think that once they are built up and detailed, that they will build into very nice and detailed models.

We train modelers could improve the finishing we give our models. Even looking at some of the competition entries at the convention, I was struck by how the standard of much of the painting was not very good, and this really let down some otherwise fine models. We have a lot to learn from the painting and weathering techniques used in aircraft kitset modelling, I think. Some rail modelers seem very slow to adopt airbrushes for example, even though these provide vastly improved finishes over brush painting. Perhaps taking our scale to the next level should not merely be a matter of refining prototypical accuracy and the scale standards, but in refining the aesthetics of our models?

Friday, April 2, 2010

Convention 2010

I've been attending the Convention all day, so I thought I would update and share some pics. I've met a bunch of people that I've only known from online, and for the most part they haven't been completely insane. (Being a model railway convention, I have met a couple of those people today however!)

Photobucket

Graham (Greytrainz) called me late on Wednesday night suggesting that we take my modules to represent NZ120 at the convention. I accepted his generous offer, and so I took Thursday off work to put some last minute detail on the modules and get them presentable. Graham turned up at about five that evening, and we took them over to the venue and set them up (helped by Jolon and Russell).

Photobucket

I spent most of today hanging around by the modules and chatting with other modelers. Most had good things to say, and it was nice to get some feedback. We had some of Jolon's and Graham's models set up on the modules, and it looked a pretty good display. Jolon had one of John Rappard's old Abs on display, which is a very nice model.

Photobucket

Graham's work on styrene etched buildings is pretty impressive by the way, I'm looking forward to getting hold of some of these.

Russell from Trackgang was there with his range, and impressive it is too. I'm looking forward to building more of the stuff. Especially impressed by some of his loco builds. I'm tempted to build a Dg after seeing what he has managed with the kit! Today he managed to sell me some premade signals, which will be going on the modules.

Photobucket

Tonight's SIG was busy and positive, with lots of discussion about the future of the scale, though we could have done with more time.

Tomorrow I'm planning to attend a couple of clinics, including one on modeling New Zealand scenery. I'm hoping to learn some techniques for making native flora.

Sunday, March 28, 2010

Station improvements

I was a little unsatisfied my station, so this week I fixed the windows and gave it a new paint job. It's yet to be weathered and glazed, but I think it already looks better than it previously did.

Photobucket

Photobucket

Photobucket

Sunday, March 21, 2010

Scenery, part 1

In my last full update I detailed how I had laid the track, and noted that I was happy to be done with it. Largely this was because I got to move on to my favourite aspect of modelling: the scenery.

Mostly, I think I model because I like the art and craft aspect of the modelling, especially of landscapes. I just really like how models look for some basic psychological reason. Railways provide a subject matter, and of course they have their own intrinsic interest, with the ability to build a model that actually functions and has some operational (play) interest. But I'm not really train nerd. This probably also explains my lack of ability to get motivated to build rolling stock in a way that I can get motivated to build scenery.

Anyway, onto the scenery for the modules. In my past layouts I've adopted a preferred method of scenery building, which is to build the frame out of timber, and lay over this a skin of chicken wire to which I then apply plaster gauze. This isn't either the lightest method nor the cheapest, but it gives a very solid base to the scenery, and it's desirable in a number of other ways that I will mention.

So the first step is to build the framework for the hills and so on. On the current modules the hills are fairly minimal, so this didn't take long at all. The scenery formers were cut out of the timber that was left over form building the framework, and then screwed and glued to the modules.

Photobucket

Photobucket

This whole process tends to add more strength to the modules (that that they really needed it) and so everything is nice and rigid (and heavier) now.

Photobucket

After I was happy with this, I sanded the scenery formers, and then cut the chicken wire to fit. This was then stapled down, and trimmed along the edges, taking care to remove any sharp and prominent bits of wire so as to avoid later annoyance.

Photobucket

Photobucket

For little lumps and bumps where the method described above would be overkill, I crumple up newspaper and tape this down with masking tape so that it forms small hills and undulations.

Next is the messy (and fun) bit: applying the plaster gauze. I'm using the Woodland Scenics gauze. As you might have noticed, I use a fair bit of their range. I generally like the look of Woodland Scenics range, plus my local hobby shop stocks most of it, so it is convenient. Again though, it's not the cheapest, and I'm sure more frugal modelers could find ways to cut down on costs.

I cut the plaster gauze up into manageable sections, quickly soak kit in a bowl of water, and then apply it, using at least two layers and smoothing it out as it dries. After this, I mix up a bowl of lightweight hydrocal, which is a type of plaster that is useful for making rock molds and also for surfacing the scenery. Using a medium size house paint brush I brush on the hydrocal, which has the consistency of watery pancake batter, but which quickly hardens.

After all this dries for a day, I'm left with this:

Photobucket

Photobucket

That's all for now. In the next post I'll describe how I add grass to the surface, and how I built the rock cutting on the river module.

Back on track...

Okay, so I can use lame puns too. Here is the most recent work I've done on the layout. I added some more trees and shrubbery. It took all of ten minutes. As previously, the trees are from the Woodland Scenics range. They're expensive, but I like the look. I'll be making my own trees soon though.

Photobucket

Photobucket

Monday, March 15, 2010

Stalled...

I haven't updated in a while. To be honest, I'm a bit stalled on the modelling front at the moment. For a start my laptop, and all my photos of the layout is still missing in action. Secondly, the water in the river has on the module has developed an annoying milky appearance in a few spots. I'm not sure why, and I'm not sure how to fix it. I'm not even sure if I should fix it, as my annoyance may be a result of my perfectionism/anal retentiveness. Lastly, work is again very busy, so there is hardly any time to do anything anyway.

Anyway, I may step away from the modules for a couple of weeks to clear my head and get motivated again. I can't complain, I've had a very good run over the last few months!

On another front, the convention is looming up. I had toyed with the thought of entering the modules in competition, but I'm simply to busy at the moment to consider that. I'll be in attendance anyway, and hopefully it will help on the motivation front. And it will be good to meet up with some like-minded folk and see what other people are up to.

Sunday, March 7, 2010

Latest Progress

I did a bit more work this weekend, but I'm still without my laptop. Here's a nice picture of the river module I just took to make up for the lack of a real post.

Photobucket

Here's a peek at this weekend's work. I built several Trackgang containers kits, and also added some concrete buffer stops. The containers were painted with Tamiya acrylics and weathered with an oil wash and Tamiya rust coloured weathering powder, which does quite a nice job of dulling down the paint surface.

Photobucket